Basic Operation

In practical operation, this is how the sequence works:

  1. Call the CQing station — After completing a contact, the other station will either call CQ again, say “QRZ” or “Field Day.” He is asking for another station to call him. I pointed out to both hams that it might as well be you. Send your call just once. Use the standard phonetic alphabet on SSB when calling the station.
  1. Receive the station’s acknowledgment — if the other station hears you, he will reply with your call. If he can read you but doesn’t quite understand your call, he will reply with whatever part of your call he copied. Using the call 9M2JPJ as an example, on CW he may send the letter “J” or the letters “JP” or even simply a “9M.” A question mark could follow any of these responses, depending on the operator’s style and band conditions. In these cases, if he is answering you, send your call once again immediately when he stops sending. In poor conditions, the other station may repeat his request several times till he has your complete call, which he will send back to you. The information required by Field Day rules will follow. Get ready to listen for it.

  On SSB, exactly the same thing occurs but with a little more plain language such as “the letter J, please” or “the Juliet Papa?” or “who’s the 9M?” Don’t get flustered or mixed up by the partial reference. Simply respond with your  whole call once again in standard phonetics and be ready for his message, as in a CW contact.

  1. Receive the station’s message — Field Day has its own requirements for the exchange between stations. The required exchange is your station’s Power Condition operating, such as “B” or “N” and your location postcode such as “43000” on CW or SSB. Exchanging your two pieces of information with his two pieces makes a valid Field Day contact.

The Field Day Rules explains what the letters of the Power Operating Condition mean. So, listen for the letter of Power Operating Condition followed by the postcode of the location. If you didn’t quite get all the information, it’s time for you to ask for a repeat (known as a “fill”) of what’s missing. That’s all there it is to it. After you copy it correctly and fully, get ready to send your information.

  1. Transmit your message — When the other station sends his exchange and pauses, it is time for you to send your information back to his, so send it without hesitation. After you transmit, his may ask for fills. For example, on CW his may ask for a repeat of your postcode by sending “L?” or for your power operating condition by sending “power?” or “pwr?,” which stands for “power.” On SSB, his will just ask you for it in words. In the crowded, fast pace of Field Day contacts, it is no shame to ask for fills more than once on either side.

Remember, a valid contact in any major operating activity, including Field Day, is a full and complete exchange of required information between two stations. That’s the rule, so do not be afraid to ask for fills yourself. Otherwise, both your efforts are wasted. Only stop asking when you get his information or when he calls someone else — sometimes the band changes and he loses your signal at his location. He might also think it’s time to move on and make other contacts that are easier and quicker to complete. Sometimes the time and effort spent in trying to complete a partial contact simply aren’t worth the benefit. If so, just let it go and move on the next station.

No harm was intended if the other station moves on. In reality, in a major contest or noncontest activity like Field Day, stations do compile scores based primarily on the number of contacts made in a given amount of time. In Field Day, it’s not the score itself that matters. More importantly, the score represents a personal measure of how effective and efficient you and your station are in an emergency or adverse situation. Take solace in the fact that you both did your best at the time.

Try not to be disappointed too long if the station finally goes on to someone else. After all, he wanted your contact in his log as much as you wanted his. It’s no personal slight to you that the contact is incomplete. Instead, it should be a motivator to improve your operating habits and station capabilities for that emergency we hope never comes. Besides, the band may change in your favor later on and you can try again.

       5. Receive the station’s acknowledgment — When the other station receives your full information, he will acknowledge it by sending an “R,” “X,” “QSL” or “TU” on CW or saying the voice equivalent on SSB. That means the contact is complete. It’s over. Log it and move on. Nothing further needs to be done except to give yourself a quick little pat on the back.

 Occasionally, the other station might not acknowledge. He may say nothing and just resume calling CQ or answer another station. I call that “acknowledgement by default” with the default being that if he doesn’t come back to you for more information, then he has got it all. It has come to be an acceptable practice more often than not, so don’t be alarmed if the other station doesn’t give you a fond farewell.

You get a better sense of when “acknowledgement by default” happens as you gain operating experience. Just wait a second and if he resumes operating with someone else or calls CQ, you’re done. If he is not finished, believe me, he will let you know and continue to work with you until the contact is complete.

One variation in acknowledgement that confuses newer operators is to copy “NIL” on CW or hear “NO QSO” on SSB. “NIL” means “Not In Log.” The other station is saying he tried his best but couldn’t quite copy your full information and, therefore, will not include the contact in his log. If he says that, you cannot claim the partial contact as a valid contact either. When you hear either of these two responses, try again later when conditions may be better.

View “NIL” or “NO QSO” as a courtesy to you, not as a rude remark, since it helps improve the accuracy of your log and lets you both move on to other contacts. Rules are getting stricter regarding logging errors, with some organizations penalizing operators for submitting logs with large numbers of such errors. You don’t want to find yourself in that situation.

  1. End the Contact — Sometimes you will hear the station you just worked say “73” or “GL” (for good luck) or “Good luck and thank you from 9….” The practice is more frequent now with programmable keyers and automatic voice devices. You may be tempted to respond the same way. Some view it as being courteous while others feel it just takes up time in which another station could make a call or contact. So if you feel the need to send one last thing, keep it short. The other station and those waiting to work him appreciate the brevity. Being brief also allows you to move on more quickly and work someone else.

*These basic operation have been adapted in accordance with the  “Basic Operation ARRL Field Day” and has been changed accordingly. 

Print Friendly, PDF & Email

Comments are closed.